The third compartment which is accessible from the backside of the container, is the engine room. This compartment contains a Low pressure compressor with air dryer, a high pressure compressor, 2x 50 litre bottles, heater, fan and switch panel.
- Air conditioner;
- Welding/cutting transformer;
- Higher capacity LP and HP compressors;
- PC computer built in;
- External CCTV system;
- Digital diver depth monitoring and logging.
Diver air panel
The diver air panel is a 2 diver air panel with a LP and HP input, built into the control panel cabinet. Diver depth is displayed on 2x 6” Diver depth gauges. All air input and output pressure are displayed on 2,5” gauges. The necessary valves lets you select the air flow. The diver supply pressure is monitored with a low pressure audible alarm. All connections are behind the panel.
The standard Novasub SCU-2DRVL-DVR is built in the control panel cabinet. This units is a 2 divers comms with integrated video camera and LED light control with Harddisk DVR. The video text overlay lets you type any text over the video including, date & time and stopwatch.The video is recorded (1 channel) on the internal DVR and displayed on 2x 15” monitors.
The HP compressor is a 230 bar, 100 l/min compressor which is connected to the 2x 50 l air buffer. The compressor switches automatic off when the filling pressure is reached.
The LP compressor is a 13 bar 525 l/min compressor which operates fully automatic. The bleeding of the tank is automatic. The outlet air from the compressor runs into the Adsorption dryer. This dryer also operates fully automatic. All bleated fluids are collected in an oil / water separator with a water overflow to the outside of the container bottom.
The main power supply connector is at the side of the container and is a CEE 5 pins 32A male connector. In general the containers operates at 3 phase 400 Vac and can be also supplied with the N for extra 230 vac power. The main switch panel has a built in transformer for converting 400 vac to 230 vac, 2 kW. The 230 vac is internal used for the Diver radio and video systems, the lights, extra sockets and some controls.
The Engine room has an automatic Fan for air cooling of the compartment. The engine room has a 2 kw heater to keep the engine room temp. above the 10 degrees. The control room has a electric heater/blower of 5,5 kw with built in thermostat.